INFO

MOHON MAAF JIKA WEBSITE INI HAMPIR 1 TAHUN INI PELAYANAN-NYA KURANG BAIK KARENA PENGELOLA YANG SAYA BERIKAN TANGGUNG JAWAB TERNYATA TIDAK MERAWAT WEBSITE INI DENGAN BAIK MAKA PER TANGGAL 1 JANUARI 2019 AKAN SAYA AMBIL ALIH DAN FIX KEMBALI.
TERIMA KASIH

Firmware Maxtron Pluto By_Filehandphone.com

Maxtron Pluto

Spesifikasi
  • Processor                                        Quad Core 1.3 GHz
  • Screen                                             5.0 Inch FWVGA
  • Resolution                                       480 X 854
  • Camera                                            Depan 2 MP, Belakang 5 MP
  • Ram                                                512 MB RAM
  • Rom                                                4 GB ROM
  • Jaringan                                           GSM/3G/HSDPA+
  • Sim                                                  Dual Sim
  • Micro SD                                        Up To 32 GB
  • Battery                                            2500 mAh
  • Sensor                                             3D Gravity Sensor
  • Connect ivity                                  Wifi, Bluetooth
  • System Oprasi                                Android 6.0, Marshmallow  


Siapkan kelengkapan flashing seperti dibawah ini :
  • Pc/laptop
  • Kabel Data
  • Driver SPD
  • File di password silahkan sms ke 082179345758 untuk konfirmasi

File di sedot dari smartphone yang baru dan langsung di test Done!!!

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : s11c_s50c
Model Brand : S7731C
Model Device: s11c_s50c
AndrVersion : 6.0
BaseBand CPU: S11C_S50C
Project Ver : MAXTRON_PLUTO_V09_20170603
Model Ext   : MAXTRON PLUTO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1784 MiB
Saved to : C:\Users\Filehandphone\Desktop\S11C_S50C_s11c_s50c_6.0_MAXTRON_PLUTO_V09_20170603_MAXTRON_PLUTO\
Done!
Perhatian!!! kerusakan Restart,Bootloop,hank sayangnya telah berhenti, dll Bukan100% software, Bisa juga disebabkan hardware, Segala resiko dan hal-hal yang tidak diinginkan akibat flash bukan tanggung jawab kami, Apabila belum ahli mengerjakan serahkan pada ahlinya.

Subscribe to receive free email updates:

1 Response to "Firmware Maxtron Pluto By_Filehandphone.com"